Prodotti > Accessori

Trouble-Free Protection Against Link, Application and Power Failure

DNM-101 is changing the way the world stays online. This mighty module with Net Optics’ new Virtual Zero Delay™ (VZD) circuitry keeps traffic passing should a Director™ or Director Pro™ lose power. It’s all you need for continuous uptime—protecting your network, links and applications—no matter what!

The New Way to Say Reliability

Net Optics new DNM-101 Module’s innovative Virtual Zero Delay circuitry guarantees that your Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason—such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper Taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-101 VZD eliminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.

DNM-101: The “Good Night’s Sleep” Module

Now you can stop worrying about power and application failures. This revolutionary new technology, available exclusively from Net Optics, improves network reliability dramatically when using copper taps. It eliminates the delay typically caused when other Taps lose power. That small delay can cascade into much longer delays as devices on the link detect a failure and attempt to re-establish communication. The DNM-101 module is quick and simple to install in your Director or Director Pro.

DNM-101 offers 12 copper ports for 6 in-line “Tap” connections and easily plugs in to all models of Director and Director Pro.

The Direct-Attach Cable, also known as a twinax cable, saves cost, reduces complexity, and increases reliability of short 10 Gigabit network links.

This 5-meter copper cable attaches directly between two SFP+ slots in Net Optics data monitoring and network controller switches, and equipment from most leading network and monitoring suppliers. It carries 10 Gbps traffic at full bandwidth, without the need for expensive SFP+ transceivers and fiber cables.

These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC- connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap´s monitor ouptuts from one duplex LC connector to two connectors that plug into two NICs on the monitoring tool.

Kits are available for all 10G and 1G singlemode (SM) and multimode (MM) media types. LC/LC cables have LC-type connectors on both ends, for use in LC-connectorized environments. LC/SC cables have LC-type connectors on the tap ends and SC connectors on the other ends, for use in SC-connectorized environments. With these cable kits, LC Fiber Taps can be used in all environments and there is no more need for bulky SC Fiber Taps.

These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC- connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap´s monitor ouptuts from one duplex LC connector to two connectors that plug into two NICs on the monitoring tool.

Kits are available for all 10G and 1G singlemode (SM) and multimode (MM) media types. LC/LC cables have LC-type connectors on both ends, for use in LC-connectorized environments. LC/SC cables have LC-type connectors on the tap ends and SC connectors on the other ends, for use in SC-connectorized environments. With these cable kits, LC Fiber Taps can be used in all environments and there is no more need for bulky SC Fiber Taps.

OverviewClean up your 12V DC Tap power connections. The Net Optics 12-Lead Power Supply packs two 12-lead power connections into 1U of rack of space. You now have the option to power 24 devices or 12 with redundant power connections. Multi voltage AC power enables worldwide interoperability for global deployments.

Combine up to 24 or 12 rack-mountable Net Optics 12V DC Taps, Port Aggregators and Dual Port Aggregators into one easy to manage supply. Each power lead delivers up to 2.4Amps across the two 12-lead connectors for a combined total of 350 Watts.

Easy to read front panel LEDs provide on the spot confirmation of power status.

Twelve Slot Rack Mount Frame

Net Optics new custom 19” rack mount panels accommodate up to twelve slim line Taps featuring our new metal design. These new 4U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing Net Optics Tap products.

Features:

* Flush Mount
* 4U (7” x 19”)
* Up to 12 slim line devices
* Includes mounting hardware for easy deployment

12 Slot Rack Mount Frame

These custom frames are designed specifically for rack-mounting Net Optics Taps. As a key ease-of-use feature, these innovative Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Twelve slot frames are compatible with any 19" rack, accomodating up to twelve 4.5" Taps in a streamlined 4U design.

Two Slot iTap Rack Mount Frame

Net Optics new custom 19” rack mount panels accommodate our intelligent iTap technology family of products. These new 1U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing iTap technology products.

The following products are supported:

* iTap GigaBit Port Aggregators
* iTap 10/100/1000 Port Aggregator
* iBypass Switch

Features:

* Flush Mount
* 1U (1.75” x 19”)
* Up to 2 devices
* Includes mounting hardware for easy deployment

8 Slot Rack Mount Frame

These custom frames are designed specifically for rack-mounting Net Optics LC Fiber Slim Taps. As a key ease-of-use feature, these innovative slim profile Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Eight slot frames are compatible with any 19" rack, and accommodate up to eight LC fiber Slim Taps in a streamlined 1U design.

6 Slot Rack Mount Frame

These custom frames are designed specifically for rack-mounting Net Optics Slim Taps. As a key ease-of-use feature, these innovative slim profile Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Six slot frames are compatible with any 19" rack, accomodating up to six 5.550" Taps in a streamlined 1U design.

Three Slot Rack Mount Frame

Net Optics new custom 19” rack mount panels accommodate up to three Taps featuring our new metal design. These new 1U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing Net Optics Tap products.

The following products are supported:

* 10/100 Port Aggregator Taps
* 10/100/1000 Tap


Features:

* Flush Mount
* 1U (1.75” x 19”)
* Up to 3 devices

Includes mounting hardware for easy deployment

3 Slot Rack Mount Frame

These custom frames are designed especially for rack-mounting Net Optics Taps. As a key ease-of-use feature, these innovative Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Three slot frames are compatible with any 19" rack, accomodating up to three 4.5" Taps in a streamlined 1U design.

Two Slot Rack Mount Frame

Net Optics new custom 19” rack mount panels accommodate up to two Taps featuring our new metal design. These new 1U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing Net Optics Tap products.

The following products are supported:

* GigaBit Port Aggregator Taps


Features:

* Flush Mount
* 1U (1.75” x 19”)
* Up to 2 devices
* Includes mounting hardware for easy deployment

2 Slot Rack Mount Frame

These custom frames are designed specifically for rack-mounting Net Optics Taps. As a key ease-of-use feature, these innovative Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Two slot frames are compatible with any 19" rack, accomodating up to two 6.5" Taps in a streamlined 1U design.

OmniPeek Enterprise is WildPackets´ flagship product. It combines all of the features of the OmniPeek product line in one product, including support for local captures from multiple interfaces and connections to an unlimited number of distributed Omnipliance network recorders.
It supports data collection from any network topology, including 10 Gigabit and Gigabit networks, and local matrix switches. OmniPeek Enterprise also provides advanced Voice and Video over IP functionality including signaling and Media analyses of voice and video, VoIP playback, voice and video Expert Analysis, Visual Expert, and more.

OmniPeek Enterprise is ideal for IT organizations responsible for network analysis and network service level agreements (SLAs) for the entire organization. A license of OmniPeek Enterprise should be considered for each location that will be supported by a network engineering professional.